RELEASE: OnTheAir Video Express & OnTheAir Video 3.3.1
What's new for both OnTheAir Video Express and OnTheAir Video 3.3.1?
- NEW: modify the audio gain for clips
- NEW: control the playback from an ATEM mixer through an IP protocol (no GPI cabling needed anymore)
- NEW: skip to 5 seconds before the end of the clip shortcut (to just check how clips chain): cmd + alt + left or right arrows.
- IMPROVED: the "Revert to" older version of the playlist
- FIXED: some issues with the SD 16:9 resize modes
- FIXED: when replacing clip, attributes are now kept
What's new for OnTheAir Video only?
- NEW: create "Live inputs" (this will either be a real video card input or a direct link from OnTheAir Video or OnTheAir Node) and use those Live inputs as a video clip in your playlist. This greatly simplifies the workflow when you want to handle Live inputs.
- NEW: "Automatically use images as logos" preference. When enabled, if you have in the same folder a png image and a movie file that bear the same name, we will use the png image automatically for the logo of that movie. These png images are then not added to the playlist when doing a drag and drop.
- IMPROVED: Optimisations of the "Smart Resize and Graphics" engine for better performances on smaller computers
Release: OnTheAir Manager 3.0.1
What's new in OnTheAir Manager 3.0.1?
- Added a button to delete schedules and a confirmation window before deleting the schedule.
- Fixed an issue when sending schedule to OnTheAir Node. This could take a long time as too many events were sent.
- Fixed an issue where the files in inspector would show as "Local Media Not Found".
- Fixed an issue when deleting clips in the Media Browser.
- Fixed an issue with the new version notifications that would not work in 10.8.
RELEASE: OnTheAir Live 3.0
OnTheAir Live goes from version 1.2.14 to version 3.0. The reason for that version jump is that OnTheAir Live 1.3.5 still used QuickTime to preview and trim the clip in the inspector. This could be confusing as OnTheAir Live was not able to read some files that OnTheAir Node could, or the other way around. With version 3.0 we now use the same engine for the OnTheAir Live preview as OnTheAir Node 3 uses to playout files. So the files that can be read by both applications are identical. This is a major change in itself which then diserved a major version number change. By using a version 3 we also bring it in pair with OnTheAir Node which is also in version 3.
So there were a lot of changes, but most are "under the hood". But here is what's new for version 3.0 :
- Added the ability to scrub in the timeline of the playlist (hold the cmd key down and click - requires OnTheAir Node 3.3 or later)
- Fixed an issue with Keychain
RELEASE: OnTheAir Node 3.3.1
What's new in OnTheAir Node 3.3.1 ?
- Optimisation of the smart playout engine for better performances on smaller computers
- Added the possibility to modify the audio gain for each clip
- Added the ability to scrub (requires OnTheAir Live 3.0 or later)
- Plugin selection is now saved
- Added notifications when new version is available (users will be notified when the next version is released).
- Updated the plugin for OnTheAir CG 3 with improved connections
- Improved compatibility with El Capitan
- Fixed an issue with the status of the license when using dongles (would should up as DEMO)
- Fixed an issue of the Node remaining in the "Starting up..." status
- Fixed an issue with 16:9 aspect ratios in SD
- Fixed an issue with some codecs shown as "Unknown" in the description in OnTheAir Live or OnTheAir Manager (for example some XDCAM files)
RELEASE: Multicam Logger 1.4.4
What's new in 1.4.4?
- Added the ability to trigger Start/Stop logging with AppleScripts (and thus with GPICommander).
- Added the ability to enter a TC offset.
- Documents now save the previous position of the windows to restore it for the next document.
- Fixed an issue when sending to Final Cut Pro X.
RELEASE: OnTheAir CG 3.1
- Added the "Live input" feature to be able to use a real video input (AJA, Blackmagic-Design, or M|family) and/or a direct link (from OnTheAir Node or OnTheAir Video) as a video item in a CG project.
- Added "Audio mixing" to support multiple sources of audio.
- RSS Tickers can now "publish" their url (can now be modified with the REST API)
- Still images and Videos can now "publish" their path (can now be modified with the REST API)
- Fixed a refresh issue when updating the variables with the REST API
RELEASE: OnTheAir Manager 3.0
OnTheAir Manager goes from version 1.3.5 to version 3.0. The reason for that version jump is that OnTheAir Manager 1.3.5 still used QuickTime to preview and trim the clip in the inspector. This could be confusing as OnTheAir Manager was not able to read some files that OnTheAir Node could, or the other way around. With version 3.0 we now use the same engine for the OnTheAir Manager preview as OnTheAir Node 3 uses to playout files. So the files that can be read by both applications are identical. This is a major change in itself which then diserved a major version number change. By using a version 3 we also bring it in pair with OnTheAir Node which is also in version 3.
So there were a lot of changes, but most are "under the hood". Below are the new features that can actually be seen :
- Added the ability to send more than a month to OnTheAir Node
- Update inspector UI
- EPG plugins have been updated to newer versions with a few fixes
- Fixed an issue with Keychain
RELEASE: MovieRecorder 3.2.14
What’s new in version 3.2.14 ?- Fixed an issue with some BMD cards when auto-detect was enabled
- Fixed an issue when deleting scheduled recordings
RELEASE: OnTheAir Video Express 3.2.9, OnTheAir Video 3.2.9
What’s new in OnTheAir Video and OnTheAir Video Express 3.2.9 ?- Added the support for Alias files
- Added the support to drag and drop folders from finder
- Fixed an issue with Thumbnails that would not be displayed
- Fixed a possible crash in Scheduler
RELEASE: Multicam Logger 1.3
What’s new in version 1.3?- General Stability and performance improvements
- Added Support for Super Source of ATEM Mixers
- Fixed an issue with 2 M/E Mixers (would mirror the actions on first block to the second one)
RELEASE: MovieRecorder 3.2.12
What’s new in version 3.2.12 ?
- General Stability and performance improvements
- Fixed issues with 10.9
- Fixed an issue with Remote sources that would not be available when changing the number of Viewers available
- Fixed recording now do not start when using a Dvc DVCPRO, or DVCPRO HD codec with a 10-bit source (which is not supported)
RELEASE: MovieRecorder 3.2.8
What’s new in version 3.2.8 ?- Fixed an issue with the Timer for Remote sources
- Remote sources now reconnect after a disconnection
- Fixed a possible crash when mixing 8bit and 10bit sources
- Fixed an issue when duplicating 2 destinations or schedules at the same time
- DV, DVCPRO and DVCPRO HD now correctly refuse to record for a 10bit source as this is not supported. Previously it was making as if it was recording.
- Fixed a possible issue with file being corrupted when a video file had no audio track
RELEASE: OnTheAir Video Express 3.2.8, OnTheAir Video 3.2.8
What’s new in OnTheAir Video and OnTheAir Video Express 3.2.8 ?- Added a large scrub window when double-clicking on the timeline in playlists
- Improved scrubbing with H.264 that don't use the .mov container
- Fixed an issue when scrubbing on classic file being recorded by MovieRecorder
- Fixed an issue with the "Update Start Time"
RELEASE: OnTheAir CG 3.0.3
What’s new in OnTheAir CG 3.0.3 ?
- General Stability and performance improvements
- Added conditions to start/stop projects automatically in CG Server (for example when a text arrives in a folder)
- Added the ability to edit directly in the timeline the items: move, change start and end transitions
- Added the ability to zoom in and out in the timeline
- Changed the project pane so you can resize it in a better way
RELEASE: MovieRecorder 3.2.6
What’s new in version 3.2.6 ?
- General Stability and performance improvements
- AJA - Added support for on card upscaling and downscaling (limitations apply)
- AJA - Added support to select the HDMI input
- AJA - Added support to select AES audio input instead of embedded SDI
- Added the ability to create more than 8 audio tracks in AVPresets (up to 16)
- Added a checkbox to enable/disabled the resize in the H.264 A/V presets
- None and Segmented destinations can no longer pause the recordings as it created issues. Only Classic destinations can pause the recordings.
- Destinations using XDCAM, HDV, AVC-Intra and H.264 can now duplicate frames when CPU performances to encode are not sufficient. Previously the recording stopped when this happened.
- Improved behaviours when using an AVPreset not compatible with the type of destination used. Will switch to the default AVPreset.
- Fixed possible crash with no TC
- Fixed issues when creating sub-folders. Recording would not start.
- Fixed NTSC interlacing issue in DV
- Fixed an issue when duplicating audio tracks
- Fixed crash when duplicating the schedules with drag and drop + alt key
- Fixed a possible crash when using Uncompressed
- Fixed an issue in Mavericks with 10bit sources using a destination that requires resize. It is not possible in Mavericks (it is in Yosemite), but destination made as if it was recording.
RELEASE: OnTheAir Video Express 3.2.7, OnTheAir Video 3.2.7
What’s new in OnTheAir Video and OnTheAir Video Express 3.2.7 ?
- General Stability and performance improvements
- Added a preference to color the whole text of the playlist cells using the Finder tag color
- Added a preference to color the whole text of the playlists in the schedule window using the Finder tag color
- When you double-click on a timed playlist in the schedule window, its start time is set to the time it will start in the schedule
- You can now open the schedule file when you double-click on the schedule path at the bottom of the schedule window
- Added tooltips in the schedule window to indicate what issue there might be
- Added a duration to Offline clips
- Added the ability to search in playlists
- Added a "Time window" to display simultaneously timing information
- Fixed issues with the scheduler when there were playlists which started with offline clips or which had only offline clips
- Fixed an issue with clip unique IDs in playlists
- Fixed the reverse field order option not being considered
What’s new in OnTheAir Tools 1.27 ?
- Added a preference to include or not the duration of offline clips in the computing of the playlists durations
RELEASE: OnTheAir Node 3.2.2
What’s new in OnTheAir Node 3.2.2 ?
- General Stability and performance improvements
- Fixed an issue with the dongles not being supported for Node 2-4
- Fixed a possible crash when the schedule was updated
- Fixed the as-run-logs location which was wrongly routed to the technical logs folder
RELEASE: OnTheAir Node 3.2.1
What’s new in OnTheAir Node 3.2.1 ?
- General Stability and performance improvements
- Fixed an issue with Blackmagic-Design devices that did not show up at first start of the preference pane
- Fixed an issue with the OnTheAir CG 1 plugin
RELEASE: MovieRecorder 3.2.3
What’s new in version 3.2.3 ?
- General Stability and performance improvements
- NEW - Added support for HDV
- NEW - Added DVCPRO50, IMX and HDV presets
- NEW - Added status icon in Logs and Activity window to see which destination had an issue or stopped recording
- Fixed - Subfolders could not be created if a file had already the same name. We now add a counter to always be able to create subfolders.
- Fixed - Some possible name and file conflicts with Scheduled Recordings
- Fixed - When quitting MovieRecorder while application was still recording, it could make invalid files for "None" destinations
- Fixed - Issue with DVCPRO NTSC codecs
- Fixed - 16:9 aspect ratio was not used for scheduled recordings
- Improved - Handling of errors and drop frames with H.264 encoders
RELEASE: MovieRecorder 3.2
What’s new in version 3.2 ?
- General Stability and performance improvements
- NEW - Integrated Remote Control - You can now remotely control any number of remote MovieRecorder from the same application
- NEW - MXF support !
- NEW - Auto naming: give automatic names to your recordings
- NEW - Activity and Logs window to monitor how your Mac performs and possible issues
- Important Note: AJA drivers 12.1 and Blackmagic-Design Drivers 10.3.1 are required with this upgrade